Enclosure for marlin PS_ON (Auto power off your printer)

https://www.thingiverse.com/thing:2193481

Enclosure for marlin PS_ON (Auto power off your printer) by 3DModularSystems

 

 

 

Description

This thing is an enclosure for a kit that works with marlin "PS_ON" feature.
This allows your printer to automatically powers off at the end of your prints.

Updates:

• 2017.11.19 - AdedV3 of the box with additional holes on the power coord output. This allows you to power ON / OFF 2 separate equipment from this PS_ON module
• 2017.03.22 - Fix hole position of the top plate
• 2017.03.21 - Original Upload

Requirements

• Marlin with PS_ON feature enabled
• Any other firmware that supports M80 and M81 Gcode
• Ramps 1.4 or any other boards that have the PS_ON pin available

BOM

• 1 Momentary switch - LA38 type => http://3dmodularsystems.com/en/eletronic-components/281-push-button-switch-for-panel-mount-380vac-10a-1no-1nc.html
• 1 meter 24 AWG dual black and red wire (about 1 meter) => http://3dmodularsystems.com/en/electronic/70-fil-double-24awg-rouge-et-noir-vendu-au-metre-lineaire.html
• 2 x 1 pin Dupont connector and crimps
• 1 Power supply cable (same as the one that goes to the Power supply of your printer)
• A few cable ties for safety (2.5x100mm)
• 8 x M3x8mm thermoplastic screws
• 1 x PSU_OFF_BOX_V2_TOP.stl
• 1 x PSU_OFF_BOX_V2_BOTTOM.stl

Kit and wiring documentation

All this is available here: http://3dmodularsystems.com/fr/upgrades/282-kit-pson-arret-automatique-pson-de-l-alimentation-de-votre-imprimante-3d-reprap.html

Enjoy 3D Printing

3D Modular Systems
Evolutive 3D Printers

You enjoy it and want to help us with a donation: https://www.paypal.me/3DMS

http://www.3dmodularsystems.com
Twitter: https://twitter.com/3dmodularsystem
Youtube: http://www.youtube.com/c/3DModularSystems3DPrinters